T&M Laundry Equipment Co.，Ltd
T&M Laundry Equipment Co.，Ltd Dryclean Laundry Presses High quality, Best service,Reasonable price
Add to Cart
1.5HP Stainless Steel Tank Vacuum Dryset
Technical Data:
| GM-V3-S 1.5Dryset Vacuum | |
| Motor-HP(kw) | 1.5(1.1) |
| Electrical Specs | 380V/50Hz/3 |
| Rotational Speed(r/min.) | 2830 |
| Inlet/Outlet-In(mm) | 3(76) |
| Diameter-In(mm) | 19.7 (500) |
| Hight0 -In(mm) | 37.6 (955) |
| Shipping Weight-lb(kg) | 162 (73) |
Where to use vaccumm dryset?
It can connect to dryclean pressing machine to removing the moisture of the press pipeline.
How to install a vacuum dryset?
The steam vacuum valve is usually located on the left side of the press.
Connect the steam valve to a vacuum valve and vacuum barrel with 2”pipe. A loose union as near the valve as possible will aid in serving the valve when required.
If the vacuum unit is servicing more than one press, check the manufacturers’ recommendations for the number of the presses and pipe sizes. The vacuum barrel should provide a minimum of 2.8 inches of the mercury of vacuum for press per operation.
The steam vacuum valve should be connected with 2” pipe to a 3/4 HP vacuum barrel. Elbows should be avoided as they will restrict steam flaw and reduce vacuum. The discharge end, or tank inlet, should be pitched at least 3” lower than the vacuum valve. The vacuum barrel should have inlet and outlet. Depending upon usage, the tank will have to be drained one time at least daily.
A proportionally larger discharge tank and a common vacuum line can be used for several pressed providing.
The main products: Dryclean pressing machine,laundry pressing equipments, finishing equipments and laundry equipment parts...
